-
Turntech No.S2 Q/C Toolpost Set (Complete Set)
The No.S2 size suits lathes with a centre height in the region of 5″ to 8″.
€312.00 -
Turntech 3 Jaw Chuck – 200mm
Supplied with inside and outside hard jaws and key.
€262.32Turntech 3 Jaw Chuck – 200mm
€262.32 -
Turntech No.S0 Q/C Toolpost Set
The No.S0 size suits lathes with a centre height in the region of 4½”.
€240.00Turntech No.S0 Q/C Toolpost Set
€240.00 -
Turntech No.00 Q/C Toolpost Set
The No.00 size suits lathes with a centre height in the region of 3½”.
€200.00Turntech No.00 Q/C Toolpost Set
€200.00 -
Turntech 3 Jaw Chuck – 160mm
Supplied with inside and outside hard jaws and key.
€198.32Turntech 3 Jaw Chuck – 160mm
€198.32 -
Turntech 3 Jaw Chuck – 125mm
Supplied with inside and outside hard jaws and key.
€183.92Turntech 3 Jaw Chuck – 125mm
€183.92 -
Turntech 3 Jaw Chuck – 100mm
Supplied with inside and outside hard jaws and key.
€156.72Turntech 3 Jaw Chuck – 100mm
€156.72 -
Glanze Parting Tool – 16mm Square Shank
The blade which holds the tip can be moved to change the depth of cut.
€136.80 -
Glanze Indexable Parting Tool – 12mm
The blade which holds the tip can be moved to change the depth of cut.
€126.00 -
Glanze Indexable Parting Tool – 10mm
The blade which holds the tip can be moved to change the depth of cut.
€118.80 -
Turntech No.S2 Q/C Standard Holder
The No.S2 size suits lathes with a centre height in the region of 5″ to 8″.
€86.40 -
Turntech No.S2 Q/C Vee Holder
The No.S2 size suits lathes with a centre height in the region of 5″ to 8″.
€84.40 -
Lynx Carbide Insert Lathe Tool Set – 1/2″ Shank – 5 Piece
Replacement tips are available.
€82.80 -
Glanze Turning Tool – 16mm Square Shank
Fully hardened for durability and with Swiss made clamping screws for long life.
€72.00 -
Glanze Boring Bar – 12mm Diameter Shank
Fully hardened for durability and with Swiss made clamping screws for long life.
€72.00 -
Borman Revolving Centre – 3MT
Multiple bearings for durability and smooth running.
€72.00 -
Glanze Boring Bar – 10mm Diameter Shank
Fully hardened for durability and with Swiss made clamping screws for long life.
€68.40 -
Turntech No.S0 Q/C Parting Holder
The No.S0 size suits lathes with a centre height in the region of 4½”.
€66.40 -
Turntech No.S0 Q/C Standard Holder
The No.S0 size suits lathes with a centre height in the region of 4½”.
€64.80 -
Glanze Boring Bar – 8mm Diameter Shank
Fully hardened for durability and with Swiss made clamping screws for long life.
€64.80